When connected with motor, it is capable of supplying up to 320 Amps (forward) of continuous motor current.
Its integrated Battery Eliminator Circuit (BEC) powers the receiver from the motor battery, with automatic cutoff of the motor power to preserve receiver power as the battery becomes depleted.
It is small and powerful, which can be used for different type of RC ship or RC car.
Battery Support: 4-12Cells Ni-MH&Ni-Cd (4.8V~7.2V, Advise), 2S&3S Li-po (7.4-11.1V).
Output Current: 320A (Forward), 270A (Brake) ,160A (Retreat)
BEC output: 5.6V / 2A
Operating system : Forward, Reverse, and Brake
Size: 43 x 29 x 27mm / 1.69 x 1.14 x 1.06in
Weight: 40g / 1.41oz
Out of control protection: yes
Low voltage protection: yes
Over-voltage protection: yes
Heat sink: yes
Recommend Model: RC Boat / RC Car
Note: If you want to take lipo batteries, please carefully read the product manual. The Jumper connect should be right, avoid burn the ESC.
1x ESC Speed Controller